¶ Specifications
Any shifter that uses up/down logic
Can be connected through two Digital Inputs (DIN) or CAN inputs (CAN3)
When using this type of shifter, there are three inputs necessary:
- Shifter Up
- Shifter Down
- Shifter Mode
Shifter Mode changes between Auto/Manual modes.
Additionally, a Shifter N input can be used to trigger Neutral gear at any given time.
¶ Shift logic (v141 onwards)
- Up and Down inputs are used to select between
P->R<>N->D(Auto) andP->R<>N->1<>2<>3<>4<>5<>6<>7<>8(Manual) - Going to Neutral from any forward gear can be done by holding the “Shifter Down” input for a prolonged period (~750ms)
- Going to Park is only allowed from Neutral gear, also by holding the “Shifter Down” input for a prolonged period (~750ms)
¶ Old logic (up to v140)
In Auto-mode, shifting sequence is P-R-N-D
In Manual-mode, shifting sequence is P-R-N-1-2-3-4-5-6-7-8