CANTCU
Hardware
Integrations
- ECUs
- Dashes
- Drivetrain
Software
-
- Configuration
- Diagnostics
- Flashing
Installation Manual
Technical info
Transmissions
Sidebar
trans:dimensions
Transmission Dimensions
| Transmission | Found in | Total Length | Bellhousing type | Mounting angle | Output flange |
|---|---|---|---|---|---|
| GS7D36SG | E9x 135/335 | 677 mm | BMW narrow | 30 deg | 105 mm (B) |
| GS7D36SG | E9x M3 | - | BMW narrow | 30 deg | 110 mm (B) |
| GS7D70SG | F1x M5/M6 | - | - | - | 110 mm (B) |
| GS7D36SG | Fxx M2/M3/M4 | 677 mm | BMW narrow | 30 deg | 110 mm (B) |
| 8HP45 (N47) | Fxx | 668 mm | BMW wide | 20 deg | 96 mm (A) |
| 8HP70 (N57) | Fxx | 668 mm | BMW wide | 20 deg | 105 mm (B) |
| 8HP70X (N57) | Fxx | 857 mm | BMW wide | 20 deg | 96 mm (C) |
Transmission
The transmission designation (typecode).
Found in
Which models transmission is found in.
Total Length
Length measured from the bellhousing (block mating) surface to output flange.
Bellhousing type
Type of bellhousing.
Mounting angle
The angle of bellhousing compared to engine.
Output flange
Measurement of PCD = Pitch Circle Diameter (= LK, Lochkreis auf deutsch).
- A = M12 through bolts
- B = M12 through bolts with inset collar on flange
- C = M12 bolts, threaded flange