CANTCU
Hardware
Integrations
- ECUs
- Dashes
- Drivetrain
Software
-
- Configuration
- Diagnostics
- Flashing
Installation Manual
Technical info
Transmissions
Sidebar
cantcu:integrations:scsdelta
SCS Delta
Initial support in v1.0.134
Supported ECUs: Delta 700,880, 900 and GDI6 ECUs (FW 01.06.2023 or newer)
Features
- Uses SCS Delta Torque Estimation
- Cuts based on Torque Management -function
- Blips based on RPM Targeting from CANTCU
Connection
CANTCU CAN3 is connected to SCS Delta CAN1 or CAN2. CAN Speed and IDs used can be freely defined.